Enable The Locate Light; Troubleshoot The Library; Diagnose A Browser-Based User Interface Problem; Diagnose A Library Problem - StorageTek SL150 Manual

Modular tape library
Table of Contents

Advertisement

Enable the Locate Light

Enable the Locate Light
If you have multiple SL150s in your data center, you an use the locate light to
physically identify a particular unit.
In the remote interface, click the locate icon
1.
Select Switch Locate Light On.
2.
The physical locate LEDs activate on the front control panel and in the black
3.
rectangle on the robot CRU.

Troubleshoot the Library

"Diagnose a Browser-Based User Interface Problem"

"Diagnose a Library Problem"

Diagnose a Browser-Based User Interface Problem
If you have problems with a browser, try a different browser. Check the SL150
1.
firmware release notes for known incompatibilities.
If you start to have problems with a browser that used to work, check for recent
2.
changes to the browser configuration:
If an update is available for the browser, install it.
3.
If you still have problems after you have tried the latest versions of several
4.
browsers, open a service request. See
page 9-11.
Diagnose a Library Problem

Diagnose a Problem if You Cannot Login to the Remote Interface

Use the Health Table to Diagnose the Issue

Locate and Remove a Cartridge Stuck in a Magazine Slot

Locate and Clear Obstructions, Such as Loose or Protruding Cartridges
Save the Health Log to a File
Run a Self-Test
Diagnose a Problem if You Cannot Login to the Remote Interface
Go to the library and check the local operator panel.
1.
If the local operator panel is working and the remote user interface is not, check
2.
the Ethernet cable connected to NET MGT port 0 at the rear of the library. Check
for network problems.
9-6 StorageTek SL150 Modular Tape Library Guide
If scripting (Javascript) has been disabled, enable it.
If browser plug-ins or extensions have been installed or updated recently,
disable or uninstall the add-on software.
If browser software has been recently updated, roll back the update and revert
to the previous version.
in the upper left of the screen.
on page 9-6
on page 9-6
"Get Parts and Technical Support"
on

Advertisement

Table of Contents
loading

Table of Contents