Drive Tray Removal and Replacement
Illustration Legend:
1 - Tape Drive Tray
2 - Robot (in the Base Module)
3 - Module Controller (in the Expansion Module)
4 - Power Supply
Drive Tray Removal and Replacement
Remove the Drive Tray
■
Replace the Drive Tray
■
Remove a Drive Filler
■
Install a Drive Filler
■
Figure 10–1 Tape Drive Tray CRU (HP LTO-5)
Illustration Legend:
1 - Drive Indicators
2 - Port Indicator (HP SAS and HP LTO-6 FC Drives)
3 - Encryption Indicator and IP Reset Switch (HP drives only)
4 - Thumbscrew (Drive Tray has Two Thumbscrews)
Remove the Drive Tray
In the remote interface, select Library in the left menu. Right-click on the drive,
1.
and then select Remove Drive.
At the back of the library, locate the drive tray with the blue LED indicator (upper
2.
left corner).
10-2 StorageTek SL150 Modular Tape Library Guide
Do not operate the library with open tape drive slot or
Warning:
power supply slots.
Removal of a bridged drive results in loss of host
IMPORTANT:
connectivity to the library.