Table of Contents
Advertisement
Log in as the default admin user.
2.
Tap the keyboard button. Enter the default password: passw0rd
3.
Tap Done.
4.
Tap Log In.
5.
Configure the Library Step 1 of 6: Change the Default Administrator Password
Figure Legend:
1 - New Password Field
2 - Keyboard Button
3 - Verify New Password Field
4 - Next Button
Tap the keyboard button
1.
Enter a new administrator password and then tap Next.
2.
Enter the new password again in the Verify New Password field.
3.
Make sure to remember the default user ID (admin) and your new password.
Tap Done.
4.
The password must be at least eight characters long and
Note:
contain one or more numeric or special characters. The value
passw0rd is invalid.
Configure the Library After Powering-on for the First Time
.
Installing the Library 2-31
Advertisement
Table of Contents
