Table of Contents
Advertisement
Open the shipping clip and install it over the 7 mm steel shaft behind the hand
3.
assembly (see image below).
Illustration Legend:
1 - Opened Shipping Clip
2 - Instruction Tag
Squeeze the clip to reduce the clamping force on the shaft and slide the clip
4.
toward the hand assembly (see image below). The hand will be contained between
the front wall and the clip.
Guide the instruction tag out of the cartridge magazine slot. Route the string and
5.
instruction tag between the mailslot and right side of the front control panel and
set it on top of the base module (see image below).
Lock the Robot for Reshipment within Rack
Replacing Components (CRUs & FRUs) 10-21
Advertisement
Table of Contents
