Install The Rear Rails For The Expansion Module; Alignment Tab Seated; Expansion Module Back Rail And Clip Nut - StorageTek SL150 Manual

Figure 2–19 Alignment Tab Seated
Illustration Legend:
1 - Tab Seated in Slot
2 - Slot in Magazine Bay

Install the Rear Rails for the Expansion Module

Slide the back rail under the expansion module tabs (see
1.
Repeat for the rail on the other side of the module.
2.
Figure 2–20 Expansion Module Back Rail and Clip Nut
Illustration Legend:
1 - Clip Nut
2 - Rear Rail
Push the back rail against the rack vertical rail.
3.
Secure the back rail to the rack vertical rail with a screw.
4.
Use a 10-32 screw when a rack has square holes (the screw
Tip:
mates with a clip nut).
Install the Expansion Module
Figure 2–20).
Installing the Library 2-21