Table of Contents
Advertisement
Unpack and Acclimate the Library
Figure 2–1 Rear View of Sun Rack II (PDU on Right Side)
Illustration Legend:
1 - Power Distribution Unit (PDU)
Unpack and Acclimate the Library
Transport the packaged unit to the staging area. Use a pallet jack to transport the
1.
base module.
Remove plastic wrap and cut shipping straps.
2.
Open the carton.
3.
Remove the front rails from the base module packing material and set them aside.
4.
Remove the foam pieces above the library module.
5.
Remove the accessory package at the end of the module, and set it aside.
6.
Remove the plastic covering the module.
7.
Grasp the module by the sides, lift it out of the carton, and set it down.
8.
2-4 StorageTek SL150 Modular Tape Library Guide
Warning:
An unpacked base module containing one tape drive
and one power supply weighs approximately 21.5 kg (47 pounds).
The rails will be used in a later instruction (see
Note:
Base Module Back
Rails").
Module is heavy. Use two persons when lifting it.
Warning:
"Install the
Advertisement
Table of Contents
