Table of Contents
Advertisement
Click Next, then review and apply the changes.
6.
Configure LME Task 3: Verify the SL150 Agent is Enrolled
After confirming the changes within the Configuration Wizard, have the OKM
administrator go to the OKM GUI and verify that the SL150 agent now shows
"Enrolled: True".
See the OKM documentation for more information.
Review and Apply Configuration Changes
Review the Summary of Configuration Changes screen. Altered settings are
1.
indicated by "changed" in the changes column.
Note any alerts
2.
If you see a problem, click Previous to return to an earlier screen or Cancel to quit.
3.
Otherwise, select the Accept all changes check box, and then click Apply.
4.
Update Library and Drive Firmware
You should check and update firmware after you first install the library. Oracle
recommends that you regularly check for firmware updates.
Identify Current Firmware Versions
■
Download Firmware from My Oracle Support
■
Upgrade the Library Firmware
■
Upgrade the Drive Firmware
■
Revert to the Previous Library Firmware
■
Identify Current Firmware Versions
From the remote interface, select Firmware in the left menu.
1.
Click the Library Firmware tab. Note the Current Firmware Version field
2.
Click the Drive Firmware tab. For each drive in the list, note the values:
3.
■
■
■
Download Firmware from My Oracle Support
Log in to My Oracle Support: https://support.oracle.com.
1.
Click the Patches & Updates tab.
2.
Within the Patch Search area, click on the Product or Family (Advanced) link.
3.
In the Product is field, enter:
4.
■
at the bottom of the screen.
Firmware Version — contains an alphanumeric string
Type — a vendor identifier plus an LTO Generation number
Interface Type — Fibre (for Fibre Channel) or SAS (for Serial Attached Small
Computer System Interface)
For library firmware: Enter SL150, and then select StorageTek SL150 Modular
Tape Library from the list of results.
Update Library and Drive Firmware
Configuring the Library 4-7
Advertisement
Table of Contents
