Expansion Module Chassis Removal And Replacement (Fru); Remove An Expansion Module; Remove Expansion Task 1: Power Down, Lock The Robot, And Remove Magazines; Expansion Module Fru - StorageTek SL150 Manual

Plug the Ethernet cables into the appropriate Net Mgt ports.
2.
Follow the power on procedures (see
3.

Expansion Module Chassis Removal and Replacement (FRU)

You must transfer cartridge magazines, tape drives, tape drive fillers, power supplies,
power supply fillers, and the module controller from the failed module to the FRU, as
applicable. You might need to remove operational modules to access the defective one.

Remove an Expansion Module

■
Replace the Expansion FRU Chassis
■
Figure 10–5 Expansion Module FRU
Illustration Legend:
1 - Flange
2 - Tab
Remove an Expansion Module

Remove Expansion Task 1: Power Down, Lock the Robot, and Remove Magazines

■
Remove Expansion Task 2: Remove the Floor, Cables, and Cords
■
Remove Expansion Task 3: Remove Operational Expansion Modules Below the
■
Defective Module
Remove Expansion Task 4: Remove Components from the Defective Module
■
Remove Expansion Task 1: Power Down, Lock the Robot, and Remove Magazines
The initial design of the expansion cable did not have plug
Note:
labels.
The expansion module is a field-replaceable unit (FRU) and
Note:
must be serviced by an Oracle service person.
Caution: You must park and lock the robot before attempting to
remove an expansion module.
Expansion Module Chassis Removal and Replacement (FRU)
"Validate the Component
Replacing Components (CRUs & FRUs) 10-13
Installation").