Load The Magazines Task 2: Load The Left Magazine In The Base Module - StorageTek SL150 Manual

Load the Magazines (Bulk Loading)
Select the magazines to unlock and click OK. The library remains offline and busy
3.
until all selected magazines are unlocked.
Slide magazines smoothly out of the enclosure, supporting the underside with one
4.
hand.

Load the Magazines Task 2: Load the Left Magazine in the Base Module

The figure below shows the layout of the base module left magazine.
1.
Optionally, populate the reserve slots with diagnostic and/or cleaning cartridges
2.
(see
Place the diagnostic cartridge at the top (if using), followed by the cleaning
cartridges. The following are all valid reserve slot configurations:
When inserting the cartridges into the magazine, orient the cartridge with the hub
3.
down and the label on the open side of the magazine. Gently push the cartridge
into the slot until the plastic retention spring snaps into place.
If using host-managed drive cleaning, place one or two LTO universal cleaning
4.
cartridges in unreserved, data slots. Reserved slots are optional, so the following
figure could represent a valid configuration for host-managed cleaning.
6-8 StorageTek SL150 Modular Tape Library Guide
"Determine the Required Number of Reserved System Slots" on page 6-5).