Install The Hook And Loop Strap; Expansion Module Id Label; Hook And Loop Strap - StorageTek SL150 Manual

Figure 2–21 Expansion Module ID Label
Illustration Legend:
1 - Module Label
2 - Horizontal Scribe Line
3 - Vertical Scribe Line

Install the Hook and Loop Strap

Insert the rivet into a hole in the hook and loop strap (see
1.
Figure 2–22 Hook and Loop Strap
Illustration Legend:
1 - Module Controller

2 - Hook and Loop Strap

3 - Rivet
Pull the plunger back from the rivet face.
2.
Align the rivet with the hole beside the module controller.
3.
Push the rivet into the hole.
4.
Push the plunger in to secure the rivet.
5.
Install the Expansion Module
Figure 2–22).
Installing the Library 2-23