Attach a label to the cable indicating the network port to ensure proper connection
3.
after a service action.
Cable the Library Task 4: Align and Dress the Cables and Cords
Gather cable slack to the outside edge of the expansion module, if necessary.
1.
Wrap the hook and loop strap around the cables and cords.
2.
Stow excess cord and cable length into the cavity between the rack stile and the
3.
side cover.
Unlock the Robot
Locate the robot lock on the back of the base module. Follow the instructions that
match your lock type:
Unlock the Knob-type Robot Lock (newer version)
■
Unlock the Thumbscrew-type Robot Lock (older version)
■
Unlock the Knob-type Robot Lock (newer version)
Turn the knob clockwise until it clicks into place.
The pointer on the knob should point past the black, unlocked padlock icon:.
Unlock the Thumbscrew-type Robot Lock (older version)
Loosen the thumbscrew. Pull the lock assembly straight out until the long tab
1.
comes out of the slot at left.
Unlock the Robot
Installing the Library 2-29