Table of Contents
Advertisement
Select the mailslot type from the list that corresponds to your configuration:
■
■
Set the system reserved slots.
2.
System reserved slots are storage slots in the SL150 library typically used to house
cleaning tapes or diagnostic tapes. Use the System Reserved Slots list to select the
desired number of slots (see
Slots"
■
■
■
■
Set the volume label format. Use the Volume Label Format list to select the
3.
desired number of slots and then tap Next.
To accommodate various cartridge labeling schemes, the SL150 library supports
labels eight to 14 characters long and provides a label windowing feature that lets
you specify how the labels should be interpreted by the host application. See
"Label Format Types"
Configure the Library Step 6 of 6: Review and Apply Initialization Settings
Verify the value of each initialization settings (alter any incorrect value before
1.
applying changes by tapping Previous).
To verify the network settings, tap the Settings button on the Home screen, and
2.
then tap the Network Port 1 tab.
If all settings are correct, tap Apply.
3.
The library restarts. The duration of the restart depends on the size of library.
4.
Refer to the ACSLS documentation for release levels which
Note:
support the Expanded Mailslot Configuration.
Standard Mailslot (4 slots)
Expanded (19 slots)
on page 6-5).
No reserved slot
1 reserved slot
2 reserved slots
3 reserved slots
on page 6-4 for a description of the format types.
Configure the Library After Powering-on for the First Time
"Determine the Required Number of Reserved System
Installing the Library 2-35
Advertisement
Table of Contents
