Table of Contents
Advertisement
Restart a Drive
Right-click on the expired cleaning cartridge, and move it to the mailslot (see
3.
"Move Tape Cartridges with the Remote Interface"
Open the
4.
Dispose of the expired media promptly, so that dirty cartridges are not
5.
inadvertently reimported and reused.
Place new cleaning media in the mailslot. Then
6.
Move the new cleaning media from the mailslot to the reserved system slot(s)
7.
Replace Expired Cleaning Media Using the Host Application
Use this procedure to replace a cleaning cartridge in a host-managed storage slot.
If the library is partitioned,
1.
Move the expired cartridge into the library mailslot using the host application.
2.
Consult your application documentation for instructions.
Open the
3.
Dispose of the expired cartridge promptly, so that dirty cartridges are not
4.
inadvertently reimported and reused.
Place new a cleaning cartridge in the mailslot. Then
5.
Import the new cleaning cartridge into the library using the host application.
6.
Consult your application documentation for instructions.
Restart a Drive
Restarting a drive powers the drive off and then back on and performs initialization of
the drive. This action may resolve some drive problems.
In the remote interface, select Library in the left menu.
1.
Right-click the drive, and then select Restart Drive.
2.
Update Drive Firmware
For instructions on obtaining and installing updated drive firmware, see
Library and Drive Firmware"
8-6 StorageTek SL150 Modular Tape Library Guide
Mailslot, and remove the expired cleaning media.
Assign the Mailslot to a
Mailslot, and remove the expired cleaning media.
on page 4-7.
on page 6-11).
Close the
Mailslot.
Partition.
Close the
Mailslot.
"Update
Advertisement
Table of Contents
