Install The Base Module Back Rails; Base Module Accessory Package Mounting Hardware - StorageTek SL150 Manual

Install the Base Module
Figure 2–2 Base Module Accessory Package Mounting Hardware
Illustration Legend:
1 - Back Rails
2 - Clip Nuts
3 - Screws (Assorted Types)
4 - Hex Key
5 - Mounting Block

Install the Base Module Back Rails

Tools Required
#2 Phillips screwdriver (not provided).
Parts Required
Back rails (1 left, 1 right)
Two Mounting blocks
Two 8–32 X 5/8 screws
2-6 StorageTek SL150 Modular Tape Library Guide