Shipping Insert
Install and Lock
Follow these instructions to properly install and lock the shipping insert into a
CSL. Before you can lock the shipping insert into the CSL, you must use the
manual unload device (MUD) screw
to lower the cleaning brush within the drive.
CAUTION:
If the shipping insert is not locked into the tape drive, the drive head will
become damaged in shipment.
Notes:
Figure 6-21. MUD Screw in CSL
6-32
1. Only use the MUD mechanism to reset the drive for shipping.
2. The MUD screw must be turned to the left or counter-clockwise
(CCW) to reset the drive to its shipping position and to install and
lock the shipping insert into the drive.
FEED
CHANNEL
INPUT
BIN
Ninth Edition
(Figure
6-21) to raise the reel motors and
MUD
SCREW
C53620
95739