Cartridge Scratch Loader (CSL)
The CSL consists of a 9840 Tape Drive, a power supply, and a scratch loader.
The CSL is an electromechanical device that can load and unload up to seven
cartridge tapes. It also has a feed channel to mount a priority cartridge into the
tape drive.
The CSL has three modes of operation. They are:
• Automatic: allows the CSL to operate automatically.
• Manual: allows the CSL to operate manually only.
• System: allows the host to control the CSL.
Shipment
The CSL ships as a 19 inch tray
One to six CSLs may be installed within the rack enclosure.
Figure 1-9. CSL in Tray
Model Numbers
Refer to
Table 1-3. CSL Configurations
CSL Configuration
Rack Mount, SCSI
Rack Mount, ESCON
Note: Refer to the System Assurance Guide (SAG) for feature codes.
95739
FEED
CHANNEL
OUTPUT
BIN
Table 1-3
for rack mount model numbers.
Ninth Edition
(Figure
1-9) that can be mounted into a rack.
INPUT
BIN
OP
PANEL
C53614
Model Number
9840S01
9840S02
Models
1-11