Messages On The Flexpendant - ABB IRC5 with FlexPendant Operating Manual

3.6.2 Messages on the FlexPendant

Overview of messages
The FlexPendant displays messages from the system. These can be status
messages, error messages, program messages, or requests for action from the
user. Some require actions, and some are plain information.
Event log messages
The event log messages are messages from the RobotWare system about system
status, events, or errors.
How to work with the event log messages is described in section
event log on page
manual - Troubleshooting IRC5.
System messages
Some messages sent out by the system are not from the event log. They can come
from other applications, such as RobotStudio.
To be able to change configurations and settings in the system from RobotStudio,
the user must request write access. This generates a message on the FlexPendant
where the operator can grant or deny access. The operator can at any time decide
to withdraw the write access.
How to request access and work with RobotStudio is described in Operating
manual - RobotStudio.
Program messages
RAPID programs can send out messages to the Operator window, see section
Operator window on page
How to generate program messages is described in Technical reference
manual - RAPID Instructions, Functions and Data types.
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
3 Navigating and handling FlexPendant
283. All messages are also described in Operating
76.
© Copyright 2018 ABB. All rights reserved.
3.6.2 Messages on the FlexPendant
Handling the
91