ABB IRB 6620 Product Manual page 280

4 Repair
4.7.1 Replacement gearbox axis 1
Continued
13
14
15
16
Refitting
The procedure below details how to remove the gearbox axis 1.
1
Continues on next page
280
Action
Fit the support, base and gear axis 1.
Make sure the base remains in a stable po-
sition before performing any work under-
neath the base!
Unscrew the 12 attachment screws and
washers securing the gearbox to the base.
CAUTION
The gearbox weighs 108 kg! All lifting
equipment used must be sized accordingly!
Remove the gearbox.
Action
If the base not already is resting on the
support base and gear, axis 1, this should
be done first.
© Copyright 2006-2018 ABB. All rights reserved.
Note
xx0600003069
• A: Gearbox, axis 1
• B: Attachment screw, M16x60
Note
Mounting of the support base and gear,
axis 1 is detailed in section
page 279.
Product manual - IRB 6620
3HAC027151-001 Revision: T
Removal on