4 Repair
4.6.4 Replacement of motor, axis 4
Continued
15
16
264
Action
Recalibrate the robot!
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
run may cause injury or damage on page
© Copyright 2006-2018 ABB. All rights reserved.
Note
Pendulum Calibration is described in Op-
erating manual - Calibration Pendulum,
enclosed with the calibration tools.
Axis Calibration is described in
ing with Axis Calibration method on
page
319.
General calibration information is included
in section
Calibration on page
First test
27.
Product manual - IRB 6620
Calibrat-
305.
3HAC027151-001 Revision: T