INVT Goodrive300-01A Series Operation Manual page 148

Goodrive300-01A series VFD for air compressor
Maintenance
parameter
Oil filter run time
Splitter run time
Lubricate oil run
time
Grease run time
2. You can edit parameters after entering the correct administrator password.
Maintenance parameters are set according to the use status of accessories. During running, if the
use time of an accessory is equal to or greater than the set time, a pre-alarm is displayed, indicating
that the accessory needs maintenance or it needs to be replaced. The use time needs to be cleared
to 0 when the new accessory is used.
Initial
value
/ It is cleared when a new oil filter is used.
/ It is cleared when a new splitter is used.
/ It is cleared when new lubrication oil is used.
/ It is cleared when new grease is used.
03.17 16:02:35
Please enter current password:
Return
Figure B-25 Administrator password input interface
03.17 16:02:35
Set value
Max. 065535
Min. 000000
Return
Figure B-26 Air filter set time
Function
0
000
Home Confirm
Air filter set time
x
xxxx h
Home
-142-
External optional accessories
Confirm