INVT Goodrive300-01A Series Operation Manual page 140

Goodrive300-01A series VFD for air compressor
B.2.4.3 Setting interface
In the main interface, you can press
In this interface, you can press the Up or Down key to select different operation functions. Then press
OK for control; press
environment interface.

Reset: enables you to reset a fault that the master VFD or fan VFD encounters.

Load/Unload: controls the start or stop of the intake valve in manual loading or unloading mode.

Start: enables you to start the device. The device can be started only in standby state.

Stop: enables you to stop the device.
Note: You can implement the start, stop, and reset functions by pressing the RUN and STOP/RST
keys on the keypad.
B.2.4.4 Alarm interface
You can press
the alarm records since the device power-on.
Note: This function equals the shortcut to Menu > Fault records > Real-time alarm. The only
difference is that a real-time alarm that is accessed by using this shortcut method cannot be cleared
in this interface and it can be cleared only in the fault record interface.
03.17 16:02:35
Reset
Load
Unload
Start
Stop
Return
Figure B-12 Setting interface
Back or
Alarm in the main interface to access real-time alarm interface and view all
Set to enter the following interface:
Set
Home Confirm
Home to return to the working
-134-
External optional accessories