FujiFilm VisualSonics Vevo MD User Manual page 327
Hide thumbs
Also See for VisualSonics Vevo MD:
- Cleaning and disinfection manual (134 pages) ,
- Getting started manual (19 pages)
Table of Contents
Advertisement
WARNING:
Disconnect the system from the power before cleaning to avoid
electrical shock.
Wear the appropriate personal protective equipment (PPE) recommended by
the chemical manufacturer, such as eyewear and gloves.
Caution:
Do not spray cleaners or disinfectants directly on surfaces or on the
connectors of the system and transducer—doing so may cause solutions to leak
into the system, damaging it and voiding the warranty.
Do not scratch the clinical display.
Do not attempt to disinfect a transducer using a method or chemical that is not
included here. This can damage the transducer and void the warranty.
Use only FUJIFILM SonoSite recommended disinfectants. Using a non-
recommended disinfecting solution or incorrect solution strength can damage the
system and void the warranty. Follow the disinfectant manufacturer's
recommendations.
Step B: Non-critical contact cleaning and disinfecting of the system and
327
transducer
Advertisement
Table of Contents
