FujiFilm VisualSonics Vevo MD User Manual page 310

8 Repeat this process, drag and Set, for the intima thickness.
9 Tap and drag the third active caliper to a beginning point on the media/adventitia
interface.
10 Tap Set if you want to drop another caliper on the media/adventitia line or tap
Done if the trace is complete.
11 When you are finished drawing your measurement, tap Done.
The measurement parameters are updated on the measurement panel. See
the measurement panel"
Note: An I/M trace needs to be placed in order from either top-down or bottom-up as
follows; lumen/intima interface=first, intima thickness=second and
media/adventitia interface=third.
310 Measurements
on page 287.
"Using