FujiFilm VisualSonics Vevo MD User Manual page 274

Control
continue to be acquired if you select to save a clip during
scanning. A tone will be heard when saving has completed.
Save Clip/Frame: Gives you the option to save either a clip or a
frame when performing an autosave. There are two choices to
trigger an autosave of a clip or frame for most imaging modes.
Autosave
Image
3 Tap any of the mode tabs in the clip settings panel to see the available options.
For frame-based modes you have the following options:
a. Specify a number of Frames in the range 10 to 1000 depending on the exam and
preset that you select
b. Save Maximum Frames and the system will save the highest number of
frames possible–he number of frames depends on the imaging parameters
For the time-based modes you have the option to specify the length of your clip, in
seconds from 5 to 30 seconds.
4 Tap Done to save your changes and close the panel.
274 Scanning
When you tap the Name Image control during live scanning
l
or reviewing an image.
You can also choose to autosave a clip or frame On Scan
l
Completion—this happens when you tap the Freeze
button.
Description