FujiFilm VisualSonics Vevo MD User Manual page 124

7 Tap Done.
Creating preset groups for multi-mode acquisition sessions
A preset group is a way to set your system to automatically apply a selected preset in
multiple-mode image acquisition sessions.
You create a preset group in the Exam Types & Presets page. When creating the
group preset, observe the following:
Name and apply the group to each mode you work with in a particular multiple
l
mode session sequence such as you would follow in a protocol SOP
You can assign a particular preset to only one group. If you need to use a preset
l
in a second preset group, create a copy of that preset using the New Preset
button and then add that preset to the new group
You can assign only one preset per mode to the same group
l
You can activate a preset group during an acquisition session by selecting a
l
preset which is part of a group
To create a preset group
1 While editing an application, in the group presets section of the window, tap New
and enter a name for your new preset group.
2 Tap Save.
3 From the mode list, displayed at the top of the window, select the mode from which
you want to select a preset.
124 System settings