Summary of Contents for FujiFilm Tieline Apeos C7070
Page 1
Apeos™ C7070 Apeos C6570 Apeos C5570 Apeos C4570 Apeos C3570 Apeos C3070 Reference Guide Main Unit February 2022 GM1046E2-4 Edition 1 FUJIFILM Business Innovation Corp.
Page 2
QR Code is a registered trademark of DENSO WAVE INCORPORATED. Other company names or product names are registered trademarks or trademarks of each company. FUJIFILM and FUJIFILM logo are registered trademarks or trademarks of FUJIFILM Corporation. Apeos, ApeosWare, DocuWorks, PaperSecurity, Smart WelcomEyes and TrustMarkingBasic are registered trademarks or trademarks of FUJIFILM Business Innovation Corp.
Page 3
Notations in Manual The following symbols are used in this manual. Indicates important information you have to know or be reminded before Important operations. Indicates supplemental information useful for operations. Note Indicates reference destinations. Refer “ ” Names and inputs of folders, files, apps, and functions. Also reference pages of the manual.
Before Using the Machine Device Components Front Tandem Tray module model Component Function Duplex Automatic Document Load a document here. Feeder Document Cover Holds a document in place. Document Glass Load a document here. Control Panel Switches the power of the machine on and off. A touch screen used for operation of the machine.
Page 5
Component Function Paper Tray 5 (Bypass) Load paper here. Tandem Trays (Paper Trays 3, 4) Left Side and Rear Component Function Telephone line connectors Use “TEL” to call when using the telephone. Use “LINE 1” for calls using a handset connected to the TEL jack.
LAN connection When connecting to the network port, keep the machine power switched off. Note When a connection failure occurs, it may be improved by setting [Disabled] in > [Settings] > [Network Settings] > [Protocol Settings] > [Ethernet Settings]> [Energy Efficient Ethernet] in the System Administrator mode.
Control Panel Refer For Control Panel, refer to the “Reference Guide - Operations”. Component Function Built-in IC Card Used to authenticate a user using an IC card. Reader (optional) Power / Power Saving The power switches on. Button Note When “Please wait...” is displayed, the machine is warming up. ...
Component Function USB memory slot Insert a USB memory device directly here. (optional) Note A memory card reader or a USB memory device cannot be connected to the USB memory slot with a USB cable. Note that the machine will not recognize the memory on a memory card reader or a memory device connected to a USB interface connector on the rear side of the machine when a USB memory device is already inserted in the USB memory slot.
Page 9
Extended Printable Area (mm) Changing the printable area settings enables you to print over a margin (4.1 mm) for the standard printable area. A3 or smaller Area excluding an image loss area along all four edges of the paper. Larger than A3 Copying Max: 297 x 432 Printing...
Page 10
A3 size (297 x 420 mm) 420 mm Lead edge 4 mm Trail edge 2 mm 414 mm 4.1 mm 4.1 mm 411.8 mm Top edge 2 mm 4.1 mm Extended printable area = Guaranteed print area 297 mm Standard Printable Area 293 mm 288.8 mm Feed direction...
Paper Recommended Paper Standard paper Paper name Paper type setting for paper Image processing Paper weight Country tray to the paper type (g/m Plain Plain (A) paper V-Paper Bond Bond (A) Fine Plain Plain (B) Hong Kong Excellence Plain Plain (B) China To use paper other than the above, contact your local representative.
Storing and Handling Paper Storing paper Follow the guidelines below since paper is susceptible to moisture in the air and easily deformed by impacts. Store paper in a place of low humidity. Paper that has absorbed moisture can create paper jams or poor image quality.
Basic Operations of the Machine Loading Paper After loading paper, configure the Paper Tray settings on the Home screen. Important Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine malfunction.
Page 14
When loading paper whose size is JIS B4 or larger, pinch the knob and lift the paper rear end guide, and set the guide into the hole for the indicated size. Pinch the two Guide Clips, and adjust to the correct paper size.
Page 15
Envelopes 75 to 90 Paper weight (g/m Postcards 106 to 220 Maximum number of sheets (sheets) Papers specified by our company The paper feeding method is the same for Paper Trays 1 and 2. Pull out the Paper Tray 1 until it stops. Slightly lift the front side of Paper Tray 1 and remove Paper Tray 1.
Page 16
Single side 52 to 300 Paper weight (g/m printing Maximum number of sheets Tray 3 (sheets) (80 g/m paper) Tray 4 1,175 Pull out the Paper Tray until it stops. When paper is already loaded in the tray, take out the paper. Pinch the guide clip, and adjust to the correct paper size.
Page 17
Open the Paper Tray. Fan a stack of paper, face the print surface down, and insert the paper gently along the Paper Guide until it stops. Important Do not set documents above the maximum fill line. It may cause paper jams or machine malfunction. Slide the Paper Guide to the correct paper size.
Page 18
Open the Paper Tray. Extend the Paper Guide to the maximum. Install the Long Paper Inserter. Open the Paper Tray. Face the print surface down, and insert the paper gently under the Paper Tray until it stops. Insert the trail edge of the paper into the Paper Tray. 3 Basic Operations of the Machine...
Adjust the Paper Guide to the correct paper size. Loading Documents Document Feeder Loadable paper B2-PC C2-PC Paper size (mm) Width 49 to 297 140 to 297 Length 85 to 432 84 to 432 Paper weight Single side printing 38 to 128 38 to 200 (g/m Double side printing...
Load the document face up (when the document is 2-sided, place the front side up) in the center of Document Feeder. Important Do not set documents above the maximum fill line. It may cause paper jams or machine malfunction. When the confirmation indicator lights up, move the document guide to align with both edges of the document.
Outputting Paper Print Surface The print surface refers to the surface printed on in single-sided printing (the first page in double- sided printing). Trays other than Side Tray: Face-down Side Tray: Face-up Note Paper cannot be output upside down. Single-sided printing Double-sided printing Paper size (mm) Width...
- Image density The output operation stops when the Center Tray becomes full. Offset Note Offset on the Extra Center Tray is optional. Offset cannot be performed on the Side Tray. The paper is output with offset stacking for easy separation. Use the printer driver to set the offset of outputs.
Page 23
Center Tray > [Settings] > [System Settings] > [Other Settings] > [Center Tray Attention Light] > [Disabled]. Duplex Automatic Document Feeder > [Settings] > [System Settings] > [Other Settings] > [Document Feeder Attention Light] > [Disabled]. Changing the Light Lighting Duration You can change the lighting duration of the Center Tray Attention Light.
Maintenance Consumables Consumables recommended by our company are manufactured under the standards suitable for this machine. Using consumables not recommended by our company may affect print quality or performance provided by the product. Use consumables that our company recommends for this machine.
Do not take out or shake the Waste Toner Container before it is filled up. Accurate detection can become no longer possible, and the toner may be spilled from the Waste Toner Container. With C7070/C6570, do not touch the filter surface at the leading end of Waste Toner Container. You can ...
Turn the handle counterclockwise. Hold the tab at either end of the Conveyance Box, and remove the box. Place the removed box upright on a flat surface. Slide out the cleaning bar from the back side of the Front Cover to clean each LED printhead. Orient the cleaning bar with the arrow ( ↑...
While turning the rollers, wipe them with a soft cloth slightly moistened with water. Close the Top Cover of the Document Feeder and make sure that there is no gap on the front or rear of the cover. Paper Jams If paper is jammed, the machine stops and an alarm sounds.
Page 28
While lifting up the Release Handle, open the Upper Left Cover. Note When the Side Tray is installed, remove the paper in the Side Tray, close the Side Tray, and then open the Upper Left Cover. When High Capacity Feeder (1 tray) is installed, hold the handle ...
Page 29
While holding the handle [A2], remove the jammed paper. Return the handle [A2] to the original position. Duplex Unit Remove the jammed paper. Pull the handle [A3]. While holding the handle [A3], remove the jammed paper. Return the handle [A3] to the original position. Close the Upper Left Cover.
Page 30
Remove the jammed paper. Close the Lower Left Cover. Standard Trays Pull out the Paper Tray where the paper jam occurred until it stops. Remove the jammed paper. Push in the Paper Tray. Tandem Trays Pull out the Paper Tray where the paper jam occurred until it stops.
If paper is jammed in the paper feed section, pull out [C]. Open the cover and remove the jammed paper. Close the cover and push in the Paper Tray. Paper Tray 5 (Bypass) Remove the jammed paper. Duplex Automatic Document Feeder B2-PC Remove all documents from the Document Tray.
Page 32
Remove the document. Close the cover. If you cannot find the document, open the Document Cover, grip the handle to open the Side 2 scanner, and then remove the document. Close the Side 2 scanner, then close the Document Cover. Lift the Document Feeder Tray and remove the document.
Page 33
If the document is caught in the entry, remove the jammed paper from the Left Cover. If the document is caught in the exit area, lift the Document Feeder Tray and pull the document toward the exit. Put the Document Feeder Tray back into position. Close the Upper Cover.
Appendix Main Specifications This section lists the main specifications of the machine. Note that the specifications and the appearance of the product may change without prior notice. Note The specifications are not intended to guarantee the image quality performance and feeding performance of all papers.
Page 35
Item Specification First copy output time C7070/C6570 C5570 C4570 C3570/C3070 (A4 ) Monochrome 3.3 seconds or less 4.9 seconds or less (monochrome seconds or seconds or priority mode) less less Color 4.1 seconds or less 6.7 seconds or less (Color priority seconds or seconds or mode)
Item Specification Space requirement C7070/C6570 Width 1,134 x Depth 790 (mm) C5570/C4570 B2-PC:Width 1,032 x Depth 720 C2-PC:Width 1,134 x Depth 790 C3570/C3070 Width 1,032 x Depth 677 : When the Paper Tray 5 (Bypass) is fully extended and the stopper of the Duplex Automatic Document Feeder is pulled out.
Item Specification Interface Standard Ethernet 1000BASE-T/100BASE-TX/10BASE-T Optional Wireless LAN (IEEE 802.11 a/b/g/n/ac) Fax Function Basic function Item Specification Original Size Max: A3, 11 x 17", long document (max: 600 mm) Recording paper size Max: A3, 11 x 17", Min: A5 Transmission time 2 seconds or more but below 3 seconds Note...
Safety Notes Refer Also refer to “User's Manual”. Machine Installation To keep this product in a good performance and condition, always use it in the following environment: Temperature: 10 - 32°C Humidity: 15 - 85% When the product is left in a chilly room and the room is rapidly warmed up by heater, dew condensation may form inside the product and cause a partial deletion on printing or scanning.
Page 42
Symbols Marked on the Machine Some of the following symbols may not be used depending on the country and/or model. DANGER, DO NOT USE THIN DO NOT USE CAUTION, AND DOCUMENT FOLDED, WARNING CREASED, OR TORN DOCUMENT CAUTION DO NOT USE (HEATED TORN PAPER SURFACE)
Page 43
MIXED SIZE DIRT ON THE DOCUMENT OUTPUT DOCUMENT LONG PAPER 5.2 Safety Notes...
New Zealand FAX modem statements General “The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services”...
Need help?
Do you have a question about the Tieline Apeos C7070 and is the answer not in the manual?
Questions and answers