FujiFilm VisualSonics Vevo MD User Manual page 307

3 Tap and drag the caliper to a point along the lumen/intima interface.
4 Tap and drag the other caliper to a point along the intima/adventitia interface.
5 When you are finished drawing your measurement, tap anywhere on the control
panel to commit the measurement.
The measurement parameters are updated on the measurement panel. See
the measurement panel"
Your IMT measurement should look like the following measurement on your image on
the clinical display:
= lumen/intima interface
= media/adventitia interface
on page 287.
To add an IMT measurement to an M-Mode image
"Using
307