FujiFilm VisualSonics Vevo MD User Manual page 122

7 Tap Done to save the preset.
To create a custom preset during scanning
A typical workflow would be to create your 2D presets first. 2D includes the largest
number of controls that can be saved; Color Doppler Mode and M-Mode are based on
2D.
The new preset appears in the presets list for the specific mode, exam type and
transducer.
The Save Preset button is used to save all of the parameters being used in the current
mode. This allows you to apply these exact parameters again later using the Presets
button.
1 Begin scanning in the desired mode. Adjust the controls to optimize your image.
2 Tap Save Preset to save the current settings as a preset.
3 Enter the name of your preset in the displayed field and tap Done to save the
setting.
The new preset appears in the mode-specific flyout when you use the Presets control.
122 System settings