FujiFilm VisualSonics Vevo MD User Manual page 47

To apply a transducer sheath
1 Place gel inside the sheath. Make sure the gel is at the end of the sheath.
2 Insert the transducer into the sheath.
3 Pull the sheath over the transducer and cable until the sheath is fully extended.
4 Secure the sheath using the bands supplied with the sheath.
5 Check for and eliminate air bubbles between the face of the transducer and the
sheath. Air bubbles between the face of the transducer and the sheath may affect the
ultrasound image.
6 Inspect the sheath to ensure that there are no holes or tears.
Transducers 47