To Add An I/M Measurement To A 2D Image - FujiFilm VisualSonics Vevo MD User Manual

6 You can edit the measurement line by tapping on a caliper and dragging it to your
desired location.
7 Tap Save Clip to save the entire clip or tap Save Frame to save a new single
frame.

To add an I/M measurement to a 2D image

Note: If the IMT measurement is not available, ask an Administrator to enable the
IMT Measurement Tools, see
1 Tap Measurements.
2 Tap I/M.
308 Measurements
"Measurements and annotations" on page 132.