FujiFilm VisualSonics Vevo MD User Manual page 271

a. To save only a frame, tap Save Frame
Save Frame can also be used to save a frame from an acquired or saved
clip, as well as saving a frame during imaging.
Note: Using Save Frame in M-Mode will save a short clip that will only
include the M-Mode data that was visible on the clinical display at the
time of saving.
b. To save a clip, tap Save Clip
This button can be used to:
save a clip while scanning
l
save an acquired clip after tapping the Freeze button
l
re-save an already saved clip with adjusted display parameters (i.e.
l
changing the display map or brightness)
To capture and save a frame
1 Ensure that clip settings are set as desired. See
next page.
2 Tap Freeze.
"Configuring clip settings"
Saving images
on the
271