FujiFilm VisualSonics Vevo MD User Manual page 43

Connecting and Disconnecting Transducers
Important: Please be aware that you switch a transducer at any time. You can
switch transducers during a live scan, after acquiring an image and during review of
an image. The Vevo MD Imaging System software allows for users to switch
transducers without any negative affect to the current exam or imaging session.
Caution: If damage is evident, do not use the transducer, and contact FUJIFILM
SonoSite or your local representative.
Transducer interface
To connect the transducer to the system
1 Turn the handle on the transducer clockwise to the vertical (unlocked) position.
Follow the directional label on the transducer to lock and unlock the handle.
Transducer connector
Transducers 43