Adding A Linear Measurement; To Add A Linear Measurement - FujiFilm VisualSonics Vevo MD User Manual

Adding a linear measurement

Linear measurements are available in B-Mode and Color Doppler Mode.

To add a linear measurement

1 Tap Measurements.
2 Tap Linear.
The linear measurement is placed on the image.
3 Tap and drag either caliper to a desired location on the image. As you move the
caliper, the measurement parameters are updated on the measurement panel. See
"Using the measurement panel"
Note: A linear measurement will only be committed to the image once a caliper has
been adjusted.
292 Measurements
on page 287.