FujiFilm VisualSonics Vevo MD User Manual page 286

To modify a measurement
Once a measurement is placed, you can edit individual calipers along the
measurement.
Note: You cannot edit a traced distance or traced area measurement after being
placed. In this case, delete the measurement and add it again.
1 Tap the measurement on the image or on the measurement panel. The
measurement will change color.
2 Tap and drag one of the calipers to the desired position. The measurement will
update on the measurement panel.
Note: Moving a caliper for a depth or time measurement will also allow you to
change the location of the measurement at the same time.
3 Tap Save Clip to save the entire clip or tap Save Frame to save a new single
frame.
286 Measurements