FujiFilm VisualSonics Vevo MD User Manual page 80

i. Select the check box of the MPPS server that you want
ii. Select the check box of the archiver
iii. Select the check box in the archiver's MPPS column
3 (Optional) If you want to use the storage commitment service, associate the
storage commitment server with the archiver:
Note: Only one storage commitment server can be selected for a location.
i. Select the check box for the storage commitment server that you want
ii. Select the check box for the archiver
iii. Select the check box in the archiver's storage commit (SC) column
4 Once you have selected your preferred location, tap Verify to confirm that the
selected servers in the selected location are properly configured and able to
communicate as a DICOM device.
One of the following connection status of the device appears in the status column:
Failed: DICOM cannot communicate with the device
l
Success: DICOM can communicate with the device
l
Unknown: The device does not support the C-ECHO (for example, verify query
l
command)
Note: Unknown is also displayed for locations that have not be checked;
in this case, the meaning of Unknown is to tell you that the device
verification has not been done.
80 System settings