Adding A Time Measurement; To Add A Time Measurement - FujiFilm VisualSonics Vevo MD User Manual

Adding a time measurement

Time measurements are available in M-Mode.

To add a time measurement

1 Tap Measurements.
2 Tap Time.
The time measurement is placed on the image.
3 Tap and drag either caliper to a desired location on the image. As you move the
caliper, the measurement parameters are updated on the measurement panel. See
"Using the measurement panel" on page 287.
4 (Optional) When a caliper is enabled, drag the entire measurement line to a new
location on the image.
5 Tap Save Clip to save the entire clip or tap Save Frame to save a new single
frame.
294 Measurements