2 Slide the transducer connector into the transducer bay underneath the control panel.
3 Push the transducer connector into the transducer interface.
4 Rotate the handle on the transducer counterclockwise to the horizontal
(locked)position and push down on the handle to lock the transducer.
To disconnect the transducer from the system
1 Flip the handle up and rotate clockwise to the vertical (unlocked) position.
2 Pull the transducer connector away from the transducer interface.
3 Slide the connector up and out of the transducer bay.
Transducer bay with transducer
connected
44
Getting started