FujiFilm VisualSonics Vevo MD User Manual page 245

You can resave an image with the zoom state activated and if you load the image in
review, you can zoom again using the same control. If you wish to return to the image
in its original state with no zoom activated, tap Default from the zoom controls.
Please note the following:
The maximum zoom factor may be less depending on the image size and the
l
minimum physical size of the image that can be displayed.
If you change presets while in the zoom state, the zoom state will be turned off.
l
If your image contains measurements and annotations, the text is not enlarged
l
when zoom is activated.
Note: Zoom is only allowed in the M-Mode window; zoom is not available for the 2D
scout or the 2D image with M-Mode sample gate.
Controls in M-Mode 245