FujiFilm VisualSonics Vevo MD User Manual page 125

4 In the presets list select the preset to add to the group.
Tap the down arrow
The system populates the corresponding mode, within your group, with the selected
preset.
The name of the group is displayed in the presets list.
Note: A preset can be used in only one group. If you create another group and add a
preset already used in a group, it will be removed from its existing group.
5 Select the next mode in the group presets and select the required preset from the
available options for the corresponding presets list from the top of the window.
6 You can change the preset in a group.
Tap the preset to be replaced and tap
selecting the required preset from the available options for the corresponding presets
list from the top of the window.
7 Tap Done to save and apply the settings.
.
to remove it, then replace it by
Presets 125