Adding A Traced Area Measurement; To Add A Traced Area Measurement - FujiFilm VisualSonics Vevo MD User Manual

Adding a traced area measurement

Traced area measurements are available in 2D and Color Doppler Mode.
Note: You cannot edit a traced area measurement after being placed. In this case,
delete the measurement and add it again.

To add a traced area measurement

1 Tap Measurements.
2 Tap Traced Area.
An active caliper is placed on the image.
3 Drag the active caliper to the initial point on the image.
4 Tap Set.
Adding a traced area measurement 295