Controls In Color Doppler Mode - FujiFilm VisualSonics Vevo MD User Manual

Controls in Color Doppler Mode

In Color Doppler Mode imaging, you can adjust the following controls in addition to
most of the 2D controls.
You can specify which controls appear in the controls bar, see
on page 207.
Some controls appear only when the image is live, others only when the image is in
review and some appear in both cases.
Some controls are related to measurements for this mode. See
Mode measurements"
Note: If an image is part of an exam that is being transferred or is already archived,
you will not be able to adjust any of the image properties: brightness, contrast,
display map, display layout, zoom, priority, orientation, and image name.
Accessing 2D controls
While imaging in Color Doppler Mode, certain 2D controls remain available.
The 2D controls can be accessed in two ways:
a. Tapping on the 2D image (the active overlay will become gray)
b. Opening More Controls and tapping on the 2D tab
on page 267 for details.
"Customizing controls"
"Adding Color Doppler
Controls in Color Doppler Mode 255