FujiFilm VisualSonics Vevo MD User Manual page 249

5 Adjust the Color Doppler gain using the gain slider.
6 Adjust other controls as needed. See
page 255. Also see "Controls in 2D"
Note: While scanning, toggle between 2D and Color by tapping the image area
border or the color box overlay—controls displayed will correspond to the current
mode.
7 Save the image for later review using Save Frame. See
page 269.
8 Tap the Color button to return to 2D scanning or tap Freeze to stop scanning.
"Controls in Color Doppler Mode"
on page 222.
Color Doppler Mode image acquisition
on
"Saving images" on
249