FujiFilm VisualSonics Vevo MD User Manual page 45

Storing Transducers
Store the nose of the transducer in the transducer and gel holder on either side of the
Vevo MD Imaging System. Position the transducer nose upward.
You can also store the transducer cables on the cable hooks; there are four hooks
available.
Store an inactive transducer by sliding the transducer connector into one of the four
shelves in the transducer connector storage.
Transducer connector storage with transducer
When you move a transducer from one facility to another, always use the supplied
packaging. Follow these guidelines when you store the transducer in its packaging:
Make sure that the transducer is clean and dry before you store it in the supplied
l
packaging
Place the transducer in the supplied packaging carefully so the cable doesn't
l
kink
Don't store the transducer in areas of extreme temperatures or in direct sunlight
l
Store the transducer separately from other instruments so it doesn't get
l
damaged accidentally
Transducers 45