FujiFilm VisualSonics Vevo MD User Manual page 120

Enabling and disabling existing presets
When a preset is enabled, it will appear in the list of available presets when you tap
the Presets control while scanning.
To disable an existing preset
1 On the Exam Types and Presets page, tap the exam type on the transducer for
which you want to modify the preset.
2 Tap Edit.
3 In the mode list, select the mode for which you want to disable a preset. The
system populates the presets list for that mode.
4 Tap the preset you would like to disable. The preset will be highlighted.
5 Tap Disable Preset.
The preset is grayed out, indicating that it has been disabled. To enable the preset,
select a disabled preset and tap Enable Preset. The preset is enabled.
120 System settings