FujiFilm VisualSonics Vevo MD User Manual page 304
Hide thumbs
Also See for VisualSonics Vevo MD:
- Cleaning and disinfection manual (134 pages) ,
- Getting started manual (19 pages)
Table of Contents
Advertisement
3 Tap and drag the first active caliper to a beginning point on the lumen/intima
interface.
4 Tap Set to place the first caliper.
5 Tap and drag the second active caliper to another point on the lumen/intima
interface.
6 Tap Set to place the second caliper.
7 Tap Set to place another caliper on the lumen/intima interface or tap Done if the
trace is complete.
Note:
A minimum of two calipers are required for this trace.
8 Repeat this process, drag and Set, for the media/adventitia interface.
9 When you are finished drawing your measurement, tap Done.
304
Measurements
Advertisement
Table of Contents
