FujiFilm VisualSonics Vevo MD User Manual page 283

Measurement
IMT
When adding measurements, observe the following:
Measurements will be displayed on both the clinical display and the control
l
panel
Measurements can be placed on a saved image loaded into review or any image
l
that has been acquired during an acquisition session
Measurements cannot be placed on an image that is part of an exam that has
l
been archived or transferring—the measurements button will not be displayed
Measurements will not be displayed during playback of a clip or if the clip was
l
exported to AVI format
Measurements and their labels will be identified with a unique matching caliper
l
which matches the measurement's listing caliper on the measurement panel
If the unit value includes more than four digits before the decimal point, the unit
l
of measure changes so that the value will have less than four digits displayed
You will need to save (or resave) your image after adding, editing or deleting
l
measurements
To view available measurements for a selected image
1 Review an image by doing one of the following:
a. If you are in Review Images, double tap a thumbnail image to open in review—
if the image is a clip, pause the clip
M-Mode
Measurements 283