FujiFilm VisualSonics Vevo MD User Manual page 270

This icon will also be displayed on the bottom right of the clinical display when
the software is actively saving data.
The frame or clip that you selected to save will be added to the saved images for the
current exam.
WARNING: To avoid mixing images saved from multiple patients, make
sure that the patient ID is displayed before you save an image. See
"Entering patient information manually"
information" on page 104.
To review saved images for the current exam or an ended exam, tap Review Images.
To save an image while scanning
An image can be saved during live scanning using the Save Frame or Save Clip
controls. The Save Frame control is permanently docked in the lower right corner of
the control panel.
If the Save Frame button is not available, you can configure the system to display it.
Tap More Controls and then tap the General tab. See
page 207.
The Save Frame button can be changed to Save Clip, see
default, when you save an image, an audio tone will sound, to turn this off, see
"General" on page 136 again.
Do either of the following:
270 Scanning
on page 173 and "Display
"Customizing controls"
"General"
on
on page 136. By