Measurements And Annotations; Annotations - FujiFilm VisualSonics Vevo MD User Manual

Measurements and annotations

On the measurements and annotations page, you can set the default font size for
measurements and annotations and enable or disable the IMT measurement tools.
The IMT measurement tools allow you to perform manual measurements of the
Intima-Media thickness
Measurement and annotations font size
This font size will be displayed when placing measurements or annotations. The
default font size is 10.
♦ Select a default font size from the drop down menu.
IMT measurement tools
Once enabled, users will be able to place IMT measurements on 2D and M-Mode
images; select from IMT and I/M in 2D and IMT in M-Mode. See "Adding an IMT
measurement" on page 302.
♦ Tap the Enable IMT measurement tools check box to enable the IMT
measurement tools.
A confirmation dialog will be displayed. Before enabling the IMT tools, it is suggested
to read "Adding an IMT measurement" on page 302 to ensure you understand how to
use these tools properly.

Annotations

On the annotations page, you can add custom annotation labels used on acquired or
saved images.
Custom annotation labels can be edited and deleted—predefined annotation labels
cannot.
132 System settings