Connectivity - FujiFilm VisualSonics Vevo MD User Manual
Hide thumbs
Also See for VisualSonics Vevo MD:
- Cleaning and disinfection manual (134 pages) ,
- Getting started manual (19 pages)
Table of Contents
Advertisement
Connectivity
On the connectivity page, you can select the network location, define network
settings and setup DICOM transfer.
Note:
A guest user will not be able to change connectivity settings.
Connecting to the network
Before configuring the system for DICOM transfer, you must connect to the network;
you can connect by using a standard Ethernet 10/100/1000 network.
To connect to the network
Devices connected to the system's Ethernet port must comply with the IEC 60601-1
or IEC 60950 standards.
♦ Plug the Ethernet cable into the Ethernet connector on the back of the computer
enclosure. See
"System components"
on page 26.
To display the connectivity page
1 Tap MORE, and then tap SYSTEM SETTINGS.
2 Tap Connectivity in the list on the left.
Connectivity
75
Advertisement
Table of Contents
Need help?
Do you have a question about the VisualSonics Vevo MD and is the answer not in the manual?
Questions and answers