(SHU?)
Result:
(SHU!0)
Indicates the shutter is open.
Open the shutter:
(SHU 0)
Close the shutter:
(SHU 1)
SIN–Select Input
Selects the active input.
Commands
Command
Description
SIN?L
Returns a list of available inputs to select based on the
selected port configuration. (Read-only)
SIN <input>
Selects a set of inputs based on the selected port
configuration. This command is only available if video
electronics are on. (Saved value)
SIN+PORT <config>
Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Return a list of available inputs:
(SIN?L)
Use one port to display an image:
(SIN+PORT 1)
Use four DDICs to display a Four-Port Quadrant image:
(SIN+PORT 4)
Result:
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
input = Subject to the range
returned in SIN?L
1 = One-Port (Default)
2 = Two-Port
3 = Four-Port Columns
4 = Four-Port Quadrants
5 = One-Port, Dual-Input 3D
6 = Two-Port, Dual-Input 3D
7 = Four-Port Columns, Dual-
Input 3D
8 = Four-Port Quadrants, Dual-
Input 3D
53